|Buy sheetmusic at SheetMusicPlus|
In music, harmony is the use of simultaneous pitches (tones, notes), or chords. The study of harmony involves chords and their construction and chord progressions and the principles of connection that govern them. Harmony is often said to refer to the "vertical" aspect of music, as distinguished from melodic line, or the "horizontal" aspect. Counterpoint, which refers to the interweaving of melodic lines, and polyphony, which refers to the relationship of separate independent voices, are thus sometimes distinguished from harmony.
Definitions, origin of term, and history of use
The term harmony derives from the Greek ἁρμονία (harmonía), meaning "joint, agreement, concord", from the verb ἁρμόζω (harmozo), "to fit together, to join". The term was often used for the whole field of music, while "music" referred to the arts in general.
In Ancient Greece, the term defined the combination of contrasted elements: a higher and lower note. Nevertheless, it is unclear whether the simultaneous sounding of notes was part of ancient Greek musical practice; "harmonía" may have merely provided a system of classification of the relationships between different pitches. In the Middle Ages the term was used to describe two pitches sounding in combination, and in the Renaissance the concept was expanded to denote three pitches sounding together.
It was not until the publication of Rameau's 'Traité de l'harmonie' (Treatise on Harmony) in 1722 that any text discussing musical practice made use of the term in the title, though that work is not the earliest record of theoretical discussion of the topic. The underlying principle behind these texts is that harmony sanctions harmoniousness (sounds that 'please') by conforming to certain pre-established compositional principles.
Current dictionary definitions, while attempting to give concise descriptions, often highlight the ambiguity of the term in modern use. Ambiguities tend to arise from either aesthetic considerations (for example the view that only "pleasing" concords may be harmonious) or from the point of view of musical texture (distinguishing between "harmonic" (simultaneously sounding pitches) and "contrapuntal" (successively sounding tones). In the words of Arnold Whittall:
The view that modern tonal harmony in Western music began in about 1600 is commonplace in music theory. This is usually accounted for by the 'replacement' of horizontal (of contrapuntal) writing, common in the music of the Renaissance, with a new emphasis on the 'vertical' element of composed music. Modern theorists, however, tend to see this as an unsatisfactory generalisation. As Carl Dahlhaus puts it:
Descriptions and definitions of harmony and harmonic practice may show bias towards European (or Western) musical traditions. For example, South Asian art music (Hindustani and Carnatic music) is frequently cited as placing little emphasis on what is perceived in western practice as conventional 'harmony'; the underlying 'harmonic' foundation for most South Asian music is the drone, a held open fifth (or fourth) that does not alter in pitch throughout the course of a composition. Pitch simultaneity in particular is rarely a major consideration. Nevertheless many other considerations of pitch are relevant to the music, its theory and its structure, such as the complex system of Rāgas, which combines both melodic and modal considerations and codifications within it. So although intricate combinations of pitches sounding simultaneously in Indian classical music do occur they are rarely studied as teleological harmonic or contrapuntal progressions, which is the case with notated Western music. This contrasting emphasis (with regard to Indian music in particular) manifests itself to some extent in the different methods of performance adopted: in Indian Music improvisation takes a major role in the structural framework of a piece, whereas in Western Music improvisation has been uncommon since the end of the 19th century,. Where it does occur in Western music (or has in the past), the improvisation will either embellish pre-notated music or, if not, draw from musical models that have previously been established in notated compositions, and therefore employ familiar harmonic schemes.
There is no doubt, nevertheless, that the emphasis on the precomposed in European art music and the written theory surrounding it shows considerable cultural bias. The Grove Dictionary of Music and Musicians (Oxford University Press) identifies this quite clearly:
Yet the evolution of harmonic practice and language itself, in Western art music, is and was facilitated by this process of prior composition (which permitted the study and analysis by theorists and composers alike of individual pre-constructed works in which pitches (and to some extent rhythms) remained unchanged regardless of the nature of the performance).
Some traditions of music performance, composition, and theory have specific rules of harmony. These rules are often held to be based on natural properties such as Pythagorean tuning's law whole number ratios ("harmoniousness" being inherent in the ratios either perceptually or in themselves) or harmonics and resonances ("harmoniousness" being inherent in the quality of sound), with the allowable pitches and harmonies gaining their beauty or simplicity from their closeness to those properties. While Pythagorean ratios can provide a rough approximation of perceptual harmonicity, they cannot account for cultural factors.
Early Western religious music often features parallel perfect intervals; these intervals would preserve the clarity of the original plainsong. These works were created and performed in cathedrals, and made use of the resonant modes of their respective cathedrals to create harmonies. As polyphony developed, however, the use of parallel intervals was slowly replaced by the English style of consonance that used thirds and sixths. The English style was considered to have a sweeter sound, and was better suited to polyphony in that it offered greater linear flexibility in part-writing. Early music also forbade usage of the tritone, as its dissonance was associated with the devil, and composers often went to considerable lengths, via musica ficta, to avoid using it. In the newer triadic harmonic system, however, the tritone became permissible, as the standardization of functional dissonance made its use in dominant chords desirable.
Although most harmony comes about as a result of two or more notes being sounded simultaneously, it is possible to strongly imply harmony with only one melodic line through the use of arpeggios or hocket. Many pieces from the baroque period for solo string instruments, such as Bach's Sonatas and partitas for solo violin, convey subtle harmony through inference rather than full chordal structures; see below:
Carl Dahlhaus (1990) distinguishes between coordinate and subordinate harmony. Subordinate harmony is the hierarchical tonality or tonal harmony well known today, while coordinate harmony is the older Medieval and Renaissance tonalité ancienne, "the term is meant to signify that sonorities are linked one after the other without giving rise to the impression of a goal-directed development. A first chord forms a 'progression' with a second chord, and a second with a third. But the former chord progression is independent of the later one and vice versa." Coordinate harmony follows direct (adjacent) relationships rather than indirect as in subordinate. Interval cycles create symmetrical harmonies, which have been extensively used by the composers Alban Berg, George Perle, Arnold Schoenberg, Béla Bartók, and Edgard Varèse's Density 21.5.
Other types of harmony are based upon the intervals used in constructing the chords used in that harmony. Most chords used in western music are based on "tertian" harmony, or chords built with the interval of thirds. In the chord C Major7, C-E is a major third; E-G is a minor third; and G to B is a major third. Other types of harmony consist of quartal harmony and quintal harmony.
An interval is the relationship between two separate musical pitches. For example, in the melody "Twinkle Twinkle Little Star", the first two notes (the first "twinkle") and the second two notes (the second "twinkle") are at the interval of one fifth. What this means is that if the first two notes were the pitch "C", the second two notes would be the pitch "G"—four scale notes, or seven chromatic notes (a perfect fifth), above it.
The following are common intervals:
Therefore, the combination of notes with their specific intervals —a chord— creates harmony. For example, in a C chord, there are three notes: C, E, and G. The note "C" is the root, with the notes "E" and "G" providing harmony, and in a G7 (G dominant 7th) chord, the root G with each subsequent note (in this case B, D and F) provide the harmony.
In the musical scale, there are twelve pitches. Each pitch is referred to as a "degree" of the scale. The names A, B, C, D, E, F, and G are insignificant. The intervals, however, are not. Here is an example:
As can be seen, no note always corresponds to a certain degree of the scale. The "root", or 1st-degree note, can be any of the 12 notes of the scale. All the other notes fall into place. So, when C is the root note, the fourth degree is F. But when D is the root note, the fourth degree is G. So while the note names are intransigent, the intervals are not. In layman's terms: a "fourth" (four-step interval) is always a fourth, no matter what the root note is. The great power of this fact is that any song can be played or sung in any key—it will be the same song, as long as the intervals are kept the same, thus transposing the harmony into the corresponding key.
When the intervals surpass the Octave (12 semitones), these intervals are named as "Extended intervals", which include particularly the 9th, 11th, and 13th Intervals, widely used in Jazz and Blues Music.
Extended Intervals are formed and named as following:
Apart from this categorization, intervals can also be divided into consonant and dissonant. As explained in the following paragraphs, consonant intervals produce a sensation of relaxation and dissonant intervals a sensation of tension.
The consonant intervals are considered to be the Unison, Octave, Fifth, Fourth and Major and Minor Third. The Third is considered Imperfect while the former are considered Perfect. In classical music the fourth may be considered to be dissonant when its function is contrapuntal.
All the other intervals, such as the 7th, 9th, 11th, and 13th are considered Dissonant and require resolution (of the produced tension) and usually preparation (depending on the music style used).
Chords and tension
In the Western tradition, harmony is manipulated using chords, which are combinations of pitch classes. In tertian or tertial harmony, so named after the interval of a third, the members of chords are found and named by stacking intervals of major and minor thirds, starting with the "root", then the "third" above the root, and the "fifth" above the root (which is a third above the third), etc. (Note that chord members are named after their interval against the root, not by their numerical inclusion in the building of the chord.) Traditionally, a chord must have at least three members to be called a chord, although 2-member dyads are sometimes treated as chords, especially in rock (see power chords). A chord with three members is called a triad because it has three members, not because it is necessarily built in thirds (see Quartal and quintal harmony for chords built with other intervals). Depending on the widths of the intervals being stacked, different qualities of chords are formed. In popular and jazz harmony, chords are named by their root plus various terms and characters indicating their qualities. To keep the nomenclature as simple as possible, some defaults are accepted (not tabulated here). For example, the chord members C, E, and G, form a C Major triad, called by default simply a "C" chord. In an "A♭" chord (pronounced A-flat), the members are A♭, C, and E♭.
In many types of music, notably baroque and jazz, chords are often augmented with "tensions". A tension is an additional chord member that creates a relatively dissonant interval in relation to one or more of the other chord members. Following the tertian practice of building chords by stacking thirds, the simplest first tension is added to a triad by stacking on top of the existing root, third, and fifth, another third above the fifth, giving a new, potentially dissonant member the interval of a seventh away from the root and therefore called the "seventh" of the chord, and producing a four-note chord, called a "seventh chord". Depending on the widths of the individual thirds stacked to build the chord, the interval between the root and the seventh of the chord may be major, minor, or diminished. (The interval of an augmented seventh reproduces the root, and is therefore left out of the chordal nomenclature.) The nomenclature allows that, by default, "C7" indicates a chord with a root, third, fifth, and seventh spelled C, E, G, and B♭. Other types of seventh chords must be named more explicitly, such as "C Major 7" (spelled C, E, G, B), "C augmented 7" (here the word augmented applies to the fifth, not the seventh, spelled C, E, G#, Bb), etc. (For a more complete exposition of nomenclature see Chord (music).)
Continuing to stack thirds on top of a seventh chord brings in the "extended tensions" or "upper tensions" (those more than an octave above the root when stacked in thirds), the ninths, elevenths, and thirteenths, and creates the chords named after them. (Note that except for dyads and triads, tertian chord types are named for the widest interval in use in the stack, not for the number of chord members, thus a ninth chord has five members, not nine.) Extensions beyond the thirteenth reproduce existing chord members and are (usually) left out of the nomenclature. Complex harmonies based on extended chords are found in abundance in jazz, modern orchestral works, film music, etc.
Typically, in the classical Common practice period a dissonant chord (chord with tension) will "resolve" to a consonant chord. Harmonization usually sounds pleasant to the ear when there is a balance between the consonant and dissonant sounds. In simple words, that occurs when there is a balance between "tense" and "relaxed" moments. For this reason, usually tension is 'prepared' and then 'resolved'.
Preparing tension means to place a series of consonant chords that lead smoothly to the dissonant chord. In this way the composer ensures introducing tension smoothly, without disturbing the listener. Once the piece reaches its sub-climax, the listener needs a moment of relaxation to clear up the tension, which is obtained by playing a consonant chord that resolves the tension of the previous chords. The clearing of this tension usually sounds pleasant to the listener.
Perception of harmony
Harmony is based on consonance, a concept whose definition has changed various times during the history of Western music. In a psychological approach, consonance is a continuous variable. Consonance can vary across a wide range. A chord may sound consonant for various reasons.
One is lack of perceptual roughness. Roughness happens when partials (frequency components) lie within a critical bandwidth, which is a measure of the ear's ability to separate different frequencies. Critical bandwidth lies between 2 and 3 semitones at high frequencies and becomes larger at lower frequencies. The roughness of two simultaneous harmonic complex tones depends on the amplitudes of the harmonics and the interval between the tones. The roughest interval in the chromatic scale is the minor second and its inversion the major seventh. For typical spectral envelopes in the central range, the second roughest interval is the major second and minor seventh, followed by the tritone, the minor third (major sixth), the major third (minor sixth) and the perfect fourth (fifth).
The second reason is perceptual fusion. A chord fuses in perception if its overall spectrum is similar to a harmonic series. According to this definition a major triad fuses better than a minor triad and a major-minor seventh chord fuses better than a major-major seventh or minor-minor seventh. These differences may not be readily apparent in tempered contexts but can explain why major triads are generally more prevalent than minor triads and major-minor sevenths generally more prevalent than other sevenths (in spite of the dissonance of the tritone interval) in mainstream tonal music. Of course these comparisons depend on style.
The third reason is familiarity. Chords that have often been heard in musical contexts tend to sound more consonant. This principle explains the gradual historical increase in harmonic complexity of Western music. For example, around 1600 unprepared seventh chords gradually became familiar and were therefore gradually perceived as more consonant.
Western music is based on major and minor triads. The reason why these chords are so central is that they are consonant in terms of both fusion and lack of roughness. they fuse because they include the perfect fourth/fifth interval. They lack roughness because they lack major and minor second intervals. No other combination of three tones in the chromatic scale satisfies these criteria.
Consonance and dissonance in balance
As Frank Zappa explained it,
In other words, a composer cannot ensure a listener's liking by using exclusively consonant sounds. However, an excess of tension may disturb the listener. The balance between the two is often considered desirable.
Contemporary music has evolved in the way that tension is less often prepared and less structured than in Baroque or Classical periods, thus producing new styles such as Jazz and Blues, where tension is not usually prepared.
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Harmony". Allthough most Wikipedia articles provide accurate information accuracy can not be guaranteed.
Symphony No. 8 in B minor "Unfinished"
String Quartet No.14 "Death and the Maiden"
Borromeo String Quartet
Ave Verum Corpus
Choeur Des Marias